Qibla Direction in Qatar

The Qibla from Qatar points generally toward the west-southwest, in the direction of the Kaaba in Makkah. The exact compass bearing depends slightly on where you are standing.

From Doha, the bearing is approximately 253°. Other cities in Qatar may differ by a degree or two, which is why the live tool can calculate the direction from your own location instead of relying only on a national reference.

If you simply need a quick answer, face west-southwest. If you want a more precise bearing, use the city table or live compass below.

Your exact Qibla direction depends on your coordinates. The tool can use your current location, a selected Qatar city, or manually entered latitude and longitude to calculate the bearing toward the Kaaba.

If location access is available, choose 'Use my location' for the most relevant result. If you prefer not to share your location, select the nearest city instead.

The calculated bearing tells you the direction to face, while the phone compass helps you physically align the device with that bearing.

From Doha, the Qibla direction is approximately 253° from north, pointing toward West-South-West.

If you are using a traditional compass, rotate until you are close to the displayed degree. If you are using the live tool on this page, allow location access and rotate your phone until the pointer aligns with the Qibla bearing.

The Doha value is a useful reference for much of the country, but nearby cities can differ slightly, so use your actual location when you need the most precise result.

Compass bearings are measured clockwise from north. North is 0°, east is 90°, south is 180°, and west is 270°.

A bearing close to 253° therefore points slightly south of due west, which is described as West-South-West.

If your compass shows degrees, turn until the reading is close to the Qibla bearing calculated for your location. You do not need to estimate the direction visually if your device can show the degree accurately.

1. 1. Choose your location

   Allow location access, select a Qatar city, or enter your coordinates manually.

2. 2. Check the calculated bearing

   The tool will show the direction in degrees from north.

3. 3. Enable the phone compass

   If your browser and device support compass sensors, enable the live compass.

4. 4. Hold the phone flat

   Keep the device level and away from nearby metal objects, magnets, speakers, chargers, or other electronics that may interfere with the sensor.

5. 5. Rotate slowly

   Turn yourself or the phone until the compass aligns with the calculated Qibla bearing.

6. 6. Recheck if the needle moves

   If the compass appears unstable, recalibrate the device or compare the live reading with the calculated degree.

A Qibla bearing is calculated from geographic coordinates toward the Kaaba. A phone compass, however, depends on device sensors and may be affected by magnetic conditions.

This is why the numerical bearing calculated by the tool can be useful even when the phone compass fluctuates. If your live needle seems unreliable, use the degree shown for your location and compare it with a stable compass reading.

Yes. Location access makes the result more specific, but it is not required.

You can select the nearest Qatar city from the city list or enter latitude and longitude manually. If you are in Doha, you can also use the Doha reference bearing shown on this page.

Location access is useful for convenience, not a requirement for using the Qibla tool.

The destination does not change: the Qibla always points toward the Kaaba in Makkah. What changes slightly is the compass bearing from your starting location.

Because Qatar is geographically compact, the difference between major cities is relatively small. A bearing calculated for Doha can therefore be a useful general reference, while your own location provides the more precise result.

Use the city table above to compare the small differences across Qatar.

For the most precise result, use your current coordinates rather than relying only on a city-wide reference.

The tool calculates the Qibla bearing from the selected location toward the Kaaba, then shows that bearing in degrees. The live compass is used to help you align yourself with that calculated direction.

If device sensors are unstable, trust the calculated bearing as the reference and verify it with a properly calibrated compass.